Tile Work by Paul

Serving the Building Industry since 1980

A look at a selection of our completed projects.

Wrapping up a hallway with the final 12x12 floor tiles.
I take real pleasure in recreating the appearance of natural stone.

Notice the grain in the travertine chosen for this bathroom. Rather than pulling tiles straight from the boxes and
setting them as-is, I sorted each piece by color and matched them one by one to highlight as much natural character as possible. I
"graded" every tile before installation, and the mix of types determined where each one would go. Lighter
tiles with little grain went on the tub deck, flowing into the lighter grained tiles on the tub face. There was enough
of the darker grained tile for the floor. The darker, low-grain tile went on the vanity. In the shower and vanity
I cut the corners of some tiles to insert the "dots".
Click to Enlarge
Click to Enlarge
Artistic accents and highlights can define a room.

For this bathroom I set a 13x13 porcelain tile, 7/16" thick, with 3x13 trim. The accent was a 1x1
mosaic flanking a 6 1/2"x6 1/2" porcelain piece laid on a diagonal. Because the 1x1 mosaic is 3/16" thick and the tiles were
7/16" thick, I mounted the mosaics on 1/4" hardibacker so the surfaces would sit flush. 2x2 mosaic
tiles were set on the shower pan.
A few more photos. Across the thousands of rooms where I've installed tile and stone, these images offer just a glimpse of what
we've accomplished and what's possible.
Additional projects not pictured here:
Eagle County Courthouse; floor tile
Eagle County Treasurer Avon Center; floor tile
Eagle County Justice Center; sheet vinyl
Cordillera Construction; original installation crew
Click to Enlarge
Miller's Creek Subdivision; head installer
Eagle Church of Christ font & bathrooms
A few more
pictures.
Granite slab strips
(8"x86") on
master bath
shower walls
w/4x4 tumbled
marble on poured
pan floor.
Silestone Top
Click to Enlarge


Other Recommended websites: